Copper · Non-Ferrous

Super Enameled Copper Wires

Name: Copper Super Enameled Copper Wires
Brand: Ritvik Metal Impex
SKU: RMI-017

Super enameled copper winding wires available up to 42 SWG, used in motor windings, transformers and electrical coil applications, manufactured with high-grade insulation enamel for thermal and electrical performance.

Material

Copper

Form

Wire

Super Enameled Copper Wires Specifications

Chemical Composition for Super Enameled Copper Wires supplied by Ritvik Metal Impex
Grade	UNS	Cu (min)	P	O	Conductivity	Typical use
ETP — Electrolytic Tough Pitch	C11000	99.90%	—	0.02–0.05	≈ 101% IACS	Busbars, strips, wire, conductors
DHP — Deoxidised High Phosphorus	C12200	99.90%	0.015–0.040	Nil	≈ 85% IACS	Water tube, ACR tube, heat exchangers
DLP — Deoxidised Low Phosphorus	C12000	99.90%	0.004–0.012	Nil	≈ 98% IACS	Brazed assemblies needing conductivity
OFE — Oxygen Free Electronic	C10100	99.99%	—	0.0005 max	≈ 101% IACS	Vacuum, semiconductor, high reliability
OF — Oxygen Free	C10200	99.95%	—	0.001 max	≈ 101% IACS	High-purity electrical and brazed work

Note: The grade is chosen by whether the product will be brazed or will carry current. Deoxidised grades braze safely; ETP maximises conductivity.

Mechanical Properties by Temper for Super Enameled Copper Wires supplied by Ritvik Metal Impex
Temper	Designation	Tensile Strength	Elongation	Supplied as	Typical use
Annealed / soft	O60	205–260 MPa	≥ 40%	Coils	ACR line sets, instrument lines, buried runs
Half hard	H55	250–310 MPa	≈ 25%	Straight lengths	Formed work needing some rigidity
Hard drawn	H58	≥ 310 MPa	≈ 8%	Straight lengths	Exposed risers, busbar stock

Note: Temper governs both formability and allowable working pressure. Annealed coil bends by hand; hard drawn is supplied in rigid straight lengths.

Size Range & Supply Condition for Super Enameled Copper Wires supplied by Ritvik Metal Impex
Parameter	Range
Bare wire diameter	0.09 mm to 12 mm
Enamelled wire diameter	0.05 mm to 5 mm (SWG, AWG or IEC 60317 metric sizes)
Thermal class — enamel	155 (F), 180 (H), 200, 220
Grade of build	Grade 1, Grade 2, Grade 3
Enamel type	Polyester, polyesterimide, polyamide-imide overcoat, self-bonding, solderable
Packing	Spools, reels, coils and drums
Standards	IEC 60317, IS 13730, NEMA MW 1000, JIS C 3202

Product Standards by Application for Super Enameled Copper Wires supplied by Ritvik Metal Impex
Standard	Covers	Sizing convention	Typical application
ASTM B88	Seamless copper water tube	Nominal size (OD = nominal + 1/8")	Potable water, plumbing, general fluid
ASTM B280	Seamless ACR tube	Actual outside diameter	HVAC, refrigeration field service
ASTM B111	Condenser tube & ferrule stock	Actual OD and wall gauge	Condensers, heat exchangers, evaporators
ASTM B68	Bright annealed seamless tube	Actual OD	Instrument and hydraulic lines
ASTM B152	Copper sheet, strip, plate & bar	Thickness and width	Busbars, strips, pressed components
IEC 60317	Enamelled winding wire	Conductor diameter	Motor, transformer and coil windings

Note: The three copper tube standards are not interchangeable — B280 ACR tube is cleaned, dehydrated and capped at the mill, and is sized by actual outside diameter.

Ordering & Supply for Super Enameled Copper Wires supplied by Ritvik Metal Impex
Parameter	Detail
Minimum order quantity	5 kg (mixed sizes within a grade can be combined to reach the MOQ)
Price basis	Ex-works Mumbai, FOB or CIF — quoted per kg, per metre or per piece depending on the form
Lead time	Ready stock dispatched in 1–3 working days; mill orders typically 2–6 weeks
Certification	Mill test certificate to EN 10204 3.1 as standard; 3.2 with third-party witness, IBR and NACE MR0175 on request
Testing available	PMI, IGC (ASTM A262), hydrostatic, ultrasonic, radiographic, impact and hardness testing
Third-party inspection	Bureau Veritas, TÜV, DNV, SGS, Lloyd's Register, Intertek, RITES and client/EPC inspection
Packing	Wooden crates or pallets, plastic caps on pipe ends, VCI wrapping where required, seaworthy export packing
Payment terms	Advance, against proforma invoice, or LC at sight for export orders
Supply area	Across India and export to the Middle East, Europe, the USA, Africa and South East Asia
Product form	Wire

Note: Cut lengths, non-standard sizes and special certification are available on request. Prices are quoted against grade, size, schedule and quantity.

Values shown are the specified minima and maxima published in the governing standards and are given for guidance. The mill test certificate supplied with your consignment reports the actual results for that heat.

Product Guide & Technical Article

Super Enameled Copper Winding Wire: Properties & Selection

Super enameled copper winding wire — also known as magnet wire — is the essential component in all electromagnetic devices. The quality of the enamel insulation directly determines the performance, efficiency, and service life of motors, transformers, and coils.

What is Enameled Wire?

Enameled wire is copper conductor coated with a thin, uniform layer of insulating enamel (polymer coating). The enamel provides electrical insulation while allowing maximum conductor packing density in coil windings, essential for achieving high efficiency in electromagnetic devices.

Insulation Classes

Class 105 (A) — polyvinyl formal (Formvar) for general purpose. Class 130 (B) — polyurethane for self-bonding and solderable coils. Class 155 (F) — polyester for improved thermal endurance. Class 180 (H) — polyesterimide for high temperature motors. Class 200+ (C) — polyamide-imide for demanding inverter-duty applications.

Size Range & Standards

Available from 0.02mm (42 SWG) to 5mm diameter. Manufactured to IS 13730, IEC 60317, NEMA MW 1000, and JIS C 3202 standards. Supplied on plastic spools, wooden drums, or steel reels.

Applications

Electric motor windings (single and three phase), distribution and power transformers, ballasts and inductors, solenoids, relays, voice coils in speakers, and deflection coils in display systems.

About Our Super Enameled Copper Wires Supply

Ritvik Metal Impex is a trusted Copper Super Enameled Copper Wires supplier and stockist based in Mumbai, Maharashtra. We supply super enameled copper wires across India including Mumbai, Pune, Delhi, Ahmedabad, Chennai, Hyderabad, Surat, and Bangalore, as well as export to UAE, Saudi Arabia, UK, USA, and South East Asia. Our super enameled copper wires are sourced from reputed mills with full material traceability and supplied with Mill Test Certificates (MTC). We offer competitive pricing, ready stock for standard sizes, and fast dispatch for urgent requirements. Contact us for the best Copper super enameled copper wires price in India.

Need Super Enameled Copper Wires?

Get a competitive quote with full material certification from Mumbai's trusted metal supplier.

WhatsApp Us

Technical Guides

In-depth reading on grades, standards and specification for this product.

Non-Ferrous

Copper Tubes, Strips and Wires: Grades, Standards and Applications

Copper grades explained: ETP vs DHP, ASTM B88 Types K/L/M, B280 ACR tube, B111 condenser tube, temper, busbar strip and enamelled winding wire.

Read Guide →Non-Ferrous

Enamelled Copper Winding Wire: A Buying Guide for Motor and Transformer Manufacturers

How to specify enamelled copper winding wire: conductor grade, insulation class by temperature, SWG vs AWG, for motor, transformer and coil manufacturers.

Read Guide →

Need a price for Super Enameled Copper Wires?

Tell us the grade, size, schedule and quantity and we will confirm stock position and a firm price. Every consignment ships with a mill test certificate traceable to the heat number.

+91 7073895597|suresh.prajapat@ritvikmetalimpex.com

WhatsApp Us Browse Catalogue

Super Enameled Copper Wires

Super Enameled Copper Wires Specifications