Copper · Non-Ferrous

Copper Tube & Sections

Name: Copper Copper Tube & Sections
Brand: Ritvik Metal Impex
SKU: RMI-014

Copper sections, hollow profiles and engineered copper components manufactured to customer-specific requirements, available in Copper, Brass and Bronze with Cupronickel options (95/5, 90/10, 70/30 alloy).

Material

Copper

Form

Profiles

Copper Tube & Sections Specifications

Chemical Composition for Copper Tube & Sections supplied by Ritvik Metal Impex
Grade	UNS	Cu (min)	P	O	Conductivity	Typical use
ETP — Electrolytic Tough Pitch	C11000	99.90%	—	0.02–0.05	≈ 101% IACS	Busbars, strips, wire, conductors
DHP — Deoxidised High Phosphorus	C12200	99.90%	0.015–0.040	Nil	≈ 85% IACS	Water tube, ACR tube, heat exchangers
DLP — Deoxidised Low Phosphorus	C12000	99.90%	0.004–0.012	Nil	≈ 98% IACS	Brazed assemblies needing conductivity
OFE — Oxygen Free Electronic	C10100	99.99%	—	0.0005 max	≈ 101% IACS	Vacuum, semiconductor, high reliability
OF — Oxygen Free	C10200	99.95%	—	0.001 max	≈ 101% IACS	High-purity electrical and brazed work

Note: The grade is chosen by whether the product will be brazed or will carry current. Deoxidised grades braze safely; ETP maximises conductivity.

Mechanical Properties by Temper for Copper Tube & Sections supplied by Ritvik Metal Impex
Temper	Designation	Tensile Strength	Elongation	Supplied as	Typical use
Annealed / soft	O60	205–260 MPa	≥ 40%	Coils	ACR line sets, instrument lines, buried runs
Half hard	H55	250–310 MPa	≈ 25%	Straight lengths	Formed work needing some rigidity
Hard drawn	H58	≥ 310 MPa	≈ 8%	Straight lengths	Exposed risers, busbar stock

Note: Temper governs both formability and allowable working pressure. Annealed coil bends by hand; hard drawn is supplied in rigid straight lengths.

Size Range & Supply Condition for Copper Tube & Sections supplied by Ritvik Metal Impex
Parameter	Range
Strip thickness	0.1 mm to 12 mm
Strip width	3 mm to 600 mm
Busbar section	3 × 10 mm up to 20 × 200 mm
Profile forms	Rectangular, square, round-edge flat, channel and custom drawn sections
Temper	Annealed (O60), half hard (H55), hard drawn (H58)
Edge condition	Mill edge, slit edge, radiused edge, full round edge
Plating	Bare, tin plated, silver plated, nickel plated

Product Standards by Application for Copper Tube & Sections supplied by Ritvik Metal Impex
Standard	Covers	Sizing convention	Typical application
ASTM B88	Seamless copper water tube	Nominal size (OD = nominal + 1/8")	Potable water, plumbing, general fluid
ASTM B280	Seamless ACR tube	Actual outside diameter	HVAC, refrigeration field service
ASTM B111	Condenser tube & ferrule stock	Actual OD and wall gauge	Condensers, heat exchangers, evaporators
ASTM B68	Bright annealed seamless tube	Actual OD	Instrument and hydraulic lines
ASTM B152	Copper sheet, strip, plate & bar	Thickness and width	Busbars, strips, pressed components
IEC 60317	Enamelled winding wire	Conductor diameter	Motor, transformer and coil windings

Note: The three copper tube standards are not interchangeable — B280 ACR tube is cleaned, dehydrated and capped at the mill, and is sized by actual outside diameter.

Ordering & Supply for Copper Tube & Sections supplied by Ritvik Metal Impex
Parameter	Detail
Minimum order quantity	5 kg (mixed sizes within a grade can be combined to reach the MOQ)
Price basis	Ex-works Mumbai, FOB or CIF — quoted per kg, per metre or per piece depending on the form
Lead time	Ready stock dispatched in 1–3 working days; mill orders typically 2–6 weeks
Certification	Mill test certificate to EN 10204 3.1 as standard; 3.2 with third-party witness, IBR and NACE MR0175 on request
Testing available	PMI, IGC (ASTM A262), hydrostatic, ultrasonic, radiographic, impact and hardness testing
Third-party inspection	Bureau Veritas, TÜV, DNV, SGS, Lloyd's Register, Intertek, RITES and client/EPC inspection
Packing	Wooden crates or pallets, plastic caps on pipe ends, VCI wrapping where required, seaworthy export packing
Payment terms	Advance, against proforma invoice, or LC at sight for export orders
Supply area	Across India and export to the Middle East, Europe, the USA, Africa and South East Asia
Product form	Profiles

Note: Cut lengths, non-standard sizes and special certification are available on request. Prices are quoted against grade, size, schedule and quantity.

Values shown are the specified minima and maxima published in the governing standards and are given for guidance. The mill test certificate supplied with your consignment reports the actual results for that heat.

Product Guide & Technical Article

Copper Sections & Profiles: Custom Engineered Solutions

Copper sections and hollow profiles go beyond standard tube forms to deliver complex cross-sectional geometries for specialized electrical, thermal, and structural applications. Custom extrusions enable engineers to optimize material use and component performance.

Types of Copper Profiles

Rectangular and square hollow sections for bus bar applications. Channel sections for electrical distribution systems. Custom extruded profiles for heat sink, waveguide, and architectural applications. Hollow conductor profiles for transformer windings and electrical machinery.

Alloy Options

Pure Copper (C11000/ETP) for maximum conductivity. Cupronickel 90/10 (CuNi10) and 70/30 (CuNi30) for marine and seawater applications. Copper-Chromium-Zirconium for high-strength, high-conductivity electrode applications. Beryllium Copper for spring contacts and precision instruments.

Manufacturing Capabilities

Profiles produced by hot extrusion followed by cold drawing to final dimensions. Custom dies manufactured for specific cross-sections. Tolerances to DIN 1785 or customer specification. Lengths up to 6 meters standard, coils for small sections.

Applications

Electrical bus bars and distribution systems, transformer windings, RF waveguides, marine hardware, heat exchangers, and architectural cladding.

About Our Copper Tube & Sections Supply

Ritvik Metal Impex is a trusted Copper Copper Tube & Sections supplier and stockist based in Mumbai, Maharashtra. We supply copper tube & sections across India including Mumbai, Pune, Delhi, Ahmedabad, Chennai, Hyderabad, Surat, and Bangalore, as well as export to UAE, Saudi Arabia, UK, USA, and South East Asia. Our copper tube & sections are sourced from reputed mills with full material traceability and supplied with Mill Test Certificates (MTC). We offer competitive pricing, ready stock for standard sizes, and fast dispatch for urgent requirements. Contact us for the best Copper copper tube & sections price in India.

Need Copper Tube & Sections?

Get a competitive quote with full material certification from Mumbai's trusted metal supplier.

WhatsApp Us

Technical Guides

In-depth reading on grades, standards and specification for this product.

Non-Ferrous

Copper Tubes, Strips and Wires: Grades, Standards and Applications

Copper grades explained: ETP vs DHP, ASTM B88 Types K/L/M, B280 ACR tube, B111 condenser tube, temper, busbar strip and enamelled winding wire.

Read Guide →

Need a price for Copper Tube & Sections?

Tell us the grade, size, schedule and quantity and we will confirm stock position and a firm price. Every consignment ships with a mill test certificate traceable to the heat number.

+91 7073895597|suresh.prajapat@ritvikmetalimpex.com

WhatsApp Us Browse Catalogue

Copper Tube & Sections

Copper Tube & Sections Specifications